MG20U201_3W应用资料.pdf

(Preliminary) DN_MG20U201 MG20U201 Design Note MG20U201 – Demo Circuit for 3W Bulb Driver General Description Electrical Characteristics This demo circuit demonstrates a buck type, Parameter Value 3W DC LED lamp application with the MG20U201 VDD of Driver IC 5.8V driver IC. The LED load is configured as 3 LEDs in VLED Nominal 9.9 V one string. ILED 300mA ± 15% The driver is operated in constant off-time Input Power 3.5W typical mode. The off time is fixed by the design and the Off-time 10.18us on-time is adjusted automatically based the on the Input Voltage: 12~85V DC input voltage level. The EMI requirement is much ILED Current 276~326mA relaxed because of the switching frequency is ILED Ripple 26mA (p-p) changed gradually as input voltage. Line Regulation +/-3% (typical 12V) The circuit is designed to supply a string of LEDs with a current of 300mA and a voltage in the range of 10V from a 12V to 85V DC input. The application is very suitable for the head lamp application of e-bike. Application Circuit Characteristics MG20U201 I_V Curve 500.0 ） 400.0 A m （ 300.0 t n e