回收玻璃粉掺配废弃物蚵壳制备发泡玻璃研究-中国鑛冶工程学会互动.PDF

回收玻璃粉摻配廢棄物蚵殼製備發泡玻璃 研究* Preparation of Foam Glass from Mixture Recycling Cullet and Oyster * Powder 1 1 2 1 1 1 2 1 T. A. Wu C. H. Chu S. B. Wen Y.H. Shen Foam glass is one of all kinds of oncoming heat- in su lat in g , sou n d in su lat ion , an d w at er-r ep ellent m at er ial s, wh ich m ay b e p r ep ar ed by emp loy in g TFT-LCD recycling glass and adequ ate foaming agent at heat 8:2 treatment. In this study, the amount of 80 wt.% recycling TFT-LCD glass and 20 wt .% sodium-calcium glass 2.5wt% 5wt%10wt% were mixed as feedstock. The mixtures doping various amount of oyster powder, namely 2.5wt%, 5wt% and 750 800 850 900 950 10wt% addition, fired at the temperatures from 750to 20min 40min 60min 950with 50increments for three different holding 4502 t ime as 20, 40, and 60 m in , r esp ect ively, and then annealed at 450for 2 h . Results of apparent density 5 wt.% and OM observation show that the density at 0.4 g/cm3 85040min for foam glass with 5 wt.% oyster powder addition can 0.4g/cm3 be obtained at 850for 40 min and uniform porosity distribution and pore size at approximate 1~3 mm was 1mm~3mm observed. 關鍵詞： TFT-LCD Key words: foam glass, TFT-LCD glass, sodium - calcium glass, oyster powder 一、前　言 * Paper presented at 2009 CIMME Annual Convention, October 23,2009, MiaoLi. 1 Department of Resources Engineering, National Cheng Kung University 2