局部透明真空镀铝复合膜的研制工艺及应用问题分析-兰光.PDFVIP

济南兰光机电技术有限公司 中国济南无影山路144 号（250031 ） 总机：（86 ）0531 传真：（86 ）0531 E-mail：marketing@ 网址： “局部透明”真空镀铝复合膜的研制工艺及应用问题分析 【摘要】真空镀铝复合膜呈现“局部透明”的技术，依靠的是一种在特定工艺下能使铝 层与基膜相互分离的透明涂料（或腊克）。而依据特定工艺使用的材料不同，该技术可 分为“水洗铝”和“酸/碱洗铝”两种。然而，经过“局部透明”工序制得的镀铝复合 袋，透明区域的铝层被洗除，仅剩基膜和热封膜复合，该部分的阻隔性较其他镀铝区域 必然有所下降。倘若内容物对水、氧非常敏感，那么这种阻隔性的变化将会对内容物的 品质产生重大影响，进而缩短相应的保质期。 【关键词】局部透明真空镀铝复合膜 阻隔性 【作者】济南兰光机电技术有限公司 Analysis on Development and Application of “Partially Transparent” Vacuum Aluminum Composite Film Abstract The vacuum aluminum composite film would become partially transparent through specific processing with transparent coating or lacquer which could separate the aluminum layer from the base film. The processing methods include “water bath” and “acid or alkali bath” with different materials. However, the aluminum layer would be removed in the transparent area of the aluminum composite film through “partially transparent” processing. Only base film and heat sealing film are remaining so that the barrier property of the transparent area in the composite film would be reduced. If the content inside the package is sensitive to water and oxygen, the change of barrier property of the composite film would influence the quality of the products greatly and as a result, the shelf life would be decreased. Key Words 济南兰光机电技术有限公司 中国济南无影山路144 号（250031 ） 总机：（86 ）0531