[信息与通信]Soc型单片机原理及应用201209.ppt

USB实验3个环境 Windows驱动 Windows编程（VB,VC++) 单片机程序 USB中断型传输实验：需求 1.单片机传一个字节到PC 2.PC传8个字节到单片机 VB接收单片机字节 Call MemSet(IOBuf, 0, IOBufSize) If IOBuf(0) 0 Then cmdP1.BackColor = HFF Else cmdP1.BackColor = H80 End If VB发送 sText = txtForLCD.Text For iI = 0 To iLength - 1 sBuffer(iI) = Mid$(sText, iI + 1, 1) IOBuf(iI) = Asc(sBuffer(iI)) Next iI If iK 8 Then For iI = iK To 8 IOBuf(iI - 1) = 32 Next iI End If send data to the MCU Call MemSet(IOBuf, 0, IOBufSize) USB中断型传输单片机程序 /************************************************************************************ * 原作者 ：EastingHouse MaHuimin+LiYuhua * 完成日期：2008.03.12. ************************************************************************************/ //----------------------------------------------------------------------------- // Includes //----------------------------------------------------------------------------- #include c8051f320.h #include stddef.h #include USB_API.h //----------------------------------------------------------------------------- // 16-bit SFR Definitions for F32x //----------------------------------------------------------------------------- BYTE Out_Packet[8] = {0,0,0,0,0,0,0,0}; // Last packet received from host BYTE In_Packet[8] = {0,0,0,0,0,0,0,0}; // Next packet to sent to host unsigned char DispData0[8]={U,S,B, ,T,s,t, };// unsigned char DispData1[8]={W,a,i,t, ,P,C,!};//USB Test Wait PC! unsigned char *lcdpoint0; //指向 lcddata数组的指针 unsigned char *lcdpoint1; //指向 lcddata数组的指针 int ii; sbit rs = P2^3; sbit e = P2^5; sbit aCard = P2^7; /*** [BEGIN] USB Descriptor Information [BEGIN] ***/ code const UINT USB_VID = 0x10C4; code const UINT USB_PID = 0xEA61; code const BYTE USB_MfrStr[] = {0x20,0x03,M,0,i,0,l,0,o,0, ,0,E,0,l,0,e,0,c,0,t,0,r,0,o,0,n,0,i,0,c,0}; // Manufacturer String code const BYTE USB_ProductStr[] = {0x10,0x03,U,0,S,0,B,0, ,0,A,0,P,0,I,0}; // Product Desc. String code const BYTE USB_