[英语学习]工业工程专业英语 周跃进 第二章.ppt

Chapter 2 Work Study Unit 1 Method Study Unit 2 Time study Unit 3 Time Measurement Methods Unit 4 Work Sampling Unit 1 Methods Study The Definition and Content of Methods Study Steps of Methods Study The Classifications of Methods Study Principles of Motion Economy Introduction to Work Study 2.Steps of Methods Study Selecting—the work to be studied boundaries to be defined. Recording—the relevant facts about the job to be recorded. Examining and developing—the way the job to be performed. Six questioning techniques Analysis with “ECRS” principles 3. Classifications of Methods Study There are three main classes of methods study: process analysis operation analysis motion analysis. Process Analysis Process analysis is one of the main contents of methods study, by which researchers can completely observe and record the whole production processes and carry out integrated analysis from a macroscopic viewpoint. Operation Analysis Man-machine Operation Analysis Construction of the Man-machine Chart Two-hand Process Analysis Motion Analysis 4.Principles of Motion Economy I Principles related to the use of human body II Principles related to the arrangement of work place Ⅲ Principles related to tools and equipment Unit 2 Time study What is time study? The methods of determining time standards The significance and purposes of time study Requirements of time study Tools of time study Process of Time Study What is time study Time study is one of the work measurement techniques Time study is a structured process of directly observing and measuring human work in order to establish the time required for completion of the work by a qualified worker when working at a defined level of performance The methods of determining time standards Estimates historical records work measurement procedures The significance of time study Accurately established time standards help increase the efficiency of the equipmen