(精选)Module 1B2教学课件.pptVIP

Attaching Parts With Dissimilar Metals – Galvanic Corrosion (26) Caused by chemical reaction when 2 different types of metal are in contact with each other The more chemically reactive metal will corrode Attaching Parts With Dissimilar Metals – Preventing Galvanic Corrosion (26) Drill all holes before applying primers Use washers/gaskets between parts Use all parts included in replacement kits Apply corrosion resistant coatings Copy original installation Attaching Parts With Dissimilar Metals – Installing Aluminum Panels (26) Use only designated fasteners Must have protective coating DACRO coating Gray in color Provides corrosion resistance Double coated, double baked Attaching Parts With Dissimilar Metals – Installing Aluminum Panels (26) TORQUER coating Added to DACRO coating Found on threaded sections Inspect coating before installation Replace fasteners if coating is damaged Attaching Parts With Dissimilar Metals – Installing Aluminum Panels (27) Some manufacturers use insulating washers to insulate from steel structure Use torque wrench to prevent washer damage Removing Broken Bolts Studs – Tools and Equipment (28) Hammer Cold chisel Screw extractors Module 1B2 Select and Understand Fastener Applications and Repair Procedures Fastener Identification – Machine and Sheetmetal Screws (18) Hex head Oval head Round head Flat head Pan head Hex head Torx head Slotted head sheetmetal screws Phillips head sheetmetal screws Self tapping sheetmetal screws Pozidriv Screws Fastener Identification – Nuts (18) Hex Square Wing Self-locking Slotted lock nut Castle Lug Pal J-nut Pop-in nylon Cage Fastener Identification – Washers (18) Flat Lock External tooth Internal tooth Wave Finishing Fastener Identification – Retainer Rings (18) Internal External E-clip Fastener Identification – Keys (18) Square Woodruff Fastener Identification – Hose Clamps (18) Screw clamp Wire clamp Crimp clamp Fastener Identification – Rivets (18) Pop rivets Plastic self-locking Threaded nut Fastener I