以陶瓷雷射熔结法快速制造原型RapidManufacturingofPrototypedby.PDFVIP

雷 Rapid Manufacturing of Prototyped by Ceramic Laser Fusion 李 Author Hwa Hsing Tang, Hsin Hung Hung, Jen Sheng Lee 立 北 Institute of Manufacturing Technology National Taipei University of Technology 雷利理 雷 量 量 零 冷 不 裂 料精 雷量 量 精 Abstract This article introduces a noble manufacturing process: ceramic laser fusion (patent pending). Its principle is first producing a thin layer of ceramic green part, second scanning the green part by laser as energy source to convert the green part to a thin ceramic layer. By repeating this procedure many times a three dimensional prototype can be manufactured. The first feature of this process is the compensation of shrinkage by direct fusion. The total part shrinkage is almost zero. The fabricated ceramic part can be dense because direct fusion of ceramic green layer. The temperature of working part rises locally very fast and drops also very fast during laser scanning. It is hard to avoid micro crack in work piece. Though, these cracks could be used as ventilation hole for air in the casting mold. So, this process has a potential to manufacturing ceramic mold for precision casting. Keyword: ceramic laser fusion, compensation of shrinkage, total part shrinkage, ceramic part, direct fusion, ceramic mold for precision casting. [1][2][3](Rapid Prototyping Manufacturing) 1984 年 1988 年 年58%率Wholers 1999 年RP 11 不數 來金 料便 不 料 北 了雷 益利 利 雷 利 行 便雷 1 雷 來降 降 便 流