整改循环泵房循环泵中遗留下来的缺陷保证循环泵安全运行.docVIP

整改循环泵房循环泵中遗留下来的缺陷保证循环泵某热电厂汽轮机组的冷却水供水方式为集中泵房式的循环供水系统，2010年7月7日，1#汽轮机停运消缺，2#汽轮机机运行，循环泵房2#、3#、4#循环泵运行，12:19时2#机真空突然急剧下降，机组低真空保护动作，自动主汽门关闭，机组负荷到零。 Cooling water supply steam turbine units of a thermal power plant for circulating water supply system, centralized pump type 1# steam turbine outage in July 7, 2010, defect elimination, 2# steam turbine circulating pump operation, 2#, 3#, 4# pump operation, 12:19 2# machine vacuum decreases abruptly, action for low vacuum protection, automatic main valve closed, set load to zero. 　　事故经过：2010年7月7日白班，3#炉2#机运行，机组运行正常。12：19时值班员发现2#机真空由–0.086MPa急剧下降,迅速检查调整轴加及均压箱压力, 12：20时2#机“低真空”保护动作,主汽门关闭，机组负荷到零。 After the accident: in July 7, 2010 3# day, furnace 2# machine operation, the unit is operating normally. The 12:19 class found in vacuum 2# machine by 0.086MPa declined sharply, quickly check and adjust the axial and surge tank pressure, 12:20 2# vacuum protection action, main valve to close to zero, the unit load. 　　一、事故原因分析 Analysis, the cause of the accident 　　通过向值班人员询问及调几组真空值得历史曲线，发现真空是急剧下降，当时认真分析了真空急剧下降的原因。 Through to the personnel on duty to ask and several groups of vacuum worth the historical curve, found that vacuum is decreased sharply, then a careful analysis of the causes of a sharp decline in vacuum. 　　真空急剧下降的原因： Cause a sharp drop in the vacuum: 　　1、低压汽封供汽不足或中断。 1, low pressure sealing steam or interrupt. 　　2、凝汽器热水井满水。 2, the condenser hot well full of water. 　　3、真空系统管道破裂，导致大量空气漏入凝汽器内。 3, the vacuum system of pipeline rupture, resulting in a large number of air leakage into the condenser. 　　4、凝汽器补水中断，空气从补水管道进入凝汽器内。 4, the condenser water supply interruption, air enters the condenser water supply pipeline from. 　　5、抽汽系统故障。 5, extraction steam system fault. 　　6、循环水中断。 6, circulating water interruption. 　　针对上述原因逐一进行查找： For the above reasons one by one in search: 　　1、通过调均压箱压力曲线正常，汽封供汽正常。 1, by adjusting the pressure tank pressure curve of normal, steam seal steam supply to normal. 　　2、检查凝汽器热水井就地水位于微机显示数据均正常，调停机前的历