计算机接口技术及应用 导论.pptVIP

计算机接口技术及应用导论;主要内容;;本课程的特点和目的;为什么要学计算机接口;计算机的分类及组成;嵌入式计算机系统的组成;通用计算机系统的组成;通用计算机的扩展;计算机接口的特点和应用;基于计算机的机械自动化系统;基于计算机的虚拟仪器;本课程的主要参考书和背景材料;本课程的主要内容;进度和时间安排;作业和答疑时间安排;其他相关的参考书;Chapter 1. Introduction. (导论) This chapter gives a brief overview of what is covered in the book with an outline of the essentials and main hardware and software components of data acquisition. Chapter 2. Analog and digital signals. (模拟和数字信号) This chapter reviews analog and digital inputs to the data acquisition system, through such techniques as temperature measurement and the use of strain gauges. Chapter 3. Signal conditioning. (信号调理) This chapter discusses how signals are conditioned before the data acquisition system can accurately acquire it. Chapter 4. The PC for real time work. (PC的实时工作) This chapter considers the various PC related issues to make it suitable for real time work such as software and hardware. Chapter 5. Plug-in data acquisition boards. (插入式数据采集板) This chapter assesses the wide range of methods of using plug-in data acquisition boards such as analog inputs/ outputs, digital inputs/outputs and counter/timer configurations.;Chapter 6. Serial data communications. (串行数据通讯) This chapter reviews the fundamental definitions and basic principles of digital serial data communications with a focus on RS-232 and RS-485. Chapter 7. Distributed and stand-alone loggers/controller. This chapter discusses the hardware and software configurations of stand-alone logger/controllers. (分布式的和单机的记录仪/控制器) Chapter 8. IEEE488 standard. (IEEE488标准) This chapter reviews the IEE 488 standard with a reference to the IEEE 488.2 and SCPI approaches. Chapter 9. Ethernet and fieldbus systems. (以太网和现场总线系统) This chapter briefly outlines the essentials of Ethernet and Fieldbus systems. Chapter 10. The universal serial bus. (通用串行总线—USB) This chapter reviews the key features of the universal serial bus, which will have a major impact on PC-based data acquisition. Chapter 11. Specif