质量控制程序14.pptVIP

衬里和涂装质量控制程序Quality Control Program For Lining and Coating 目录 contents 1. 序言 Introduction 2. 现场质量控制Field Quality Control 3. 检查表格Inspection Forms 4. 施工前检查Pre-work Inspection 5. 表面处理检查Surface Preparation Verifications 6. 衬里/涂装施工检查Lining/Coating Application Verification 7. 衬里/涂装测试检查Lining/Coating Testing Verification 8. 质量控制记录Quality Control Records 9. 检测仪器的校准/标准Instrumentation Calibration/Standards 1. Introduction序言 1、SCOPE 范围 This Quality Control Manual outlines the functions and duties of Q.C. personnel at lining/coating installation jobsites where a Quality Control Program is established to monitor field activities. Information contained within this manual describe the reporting, inspection, documentation and testing procedures established to adequately promote an effective Quality Control/Quality Assurance Program. 本质量控制手册概述了质管人员衬里和涂装现场施工的责任和职责，制定质量控制程序来监控现场的施工行为。资料包括本手册内叙述的报告、检查、文件和测试程序，充分制定有效的质量控制/质量保证程序。 2、OBJECTIVE 目的 The objective of this Quality Control Manual is to provide a reference of established minimum standards and guidelines for an effective field Q.A./Q.C. program which is uniform in functions and duties, efficient and reliable in the performance of it′s work, yet independent of the production process. References to specific industry standards have been made, whenever possible, to promote a comprehensive program. 本手册的目的是为现场检验Q.A./Q.C.程序所确定的最低标准和指导方针提供参考 统一 的责任和职责本质量控制手册的目的是为有效的现场QA/QC建立最低标准和指导方针提供参考。计划与职责和义务相同，它的工作性质是有效和可靠的，也不依赖于生产过程（步骤）参考（涉及）已制定的特有（定）的企业标准。在可能的任何时候，促进一个全面的计划。 3、Reference standard引用标准 JIS-6940-1998 Japanese Industrial Standard Flaked Glass Resin Lining Standard日本工业标准《玻璃鳞片树脂衬里标准》 JISK Japanese Industrial Standards Association《日本工业规格协会标准》 ISO Sa2 1/2 International Surface Treatment Standard《国际表面处理标准》 DIN 28051 Requirements on Structural Form of Hardware From DeutscheIndustrie Norm德国标准对金属构件的结构造型的要求 DIN 28053 Deutsche Industrie Norm Requirements of Organic Coating andLining of Hardware on Metal Base德国标准《金属构件有机涂层和衬里对金属基