按摩机控制系统设计 毕业设计及文献综述_精品.doc

东华理工大学长江学院 毕业设计(论文) 题 目 按摩机控制系统设计 英文题目 The design of the control system of massage machine 学生姓名 杨继伟 学 号 指导教师 高浪琴 职称 讲师 专 业 电子信息工程 二零零八年六月 摘 要 这次设计在描述按摩机功能的基础上，完成了一个基于PWM[1]（脉冲宽度调制）直流电机PWM技术LED驱动与控制技术PWM； 交流检测技术LED驱动与控制 The design, in describing the foundation of massage machine function, completed a spread to move and control system electric circuit, which based on PWM (Pulse Width Modulated). With techniques of SCM (Single Chip Microcomputer) and PWM of DC (Direct Current) motor, the design put forward the control system frame and the concrete design technique projects at first.Combined the hardware to put forward the mind of software design, and made use of Assembly language carrying out it. Finally, made use of the peripherals, such as the key, the buzzer，the neon lamp and the LED (Light Emitting Diode) figures tube, providing the service for the customer, and carry out the massage function and interaction for both the machine and the person. The customer can let massage machine work on the comfortable method and vibration speeds by the key; Make use of the buzzer warning or hinting the massage has finished; Make use of neon lamp shows the current work appearance; And use the LED figures tube to manifestation present speed of motor. The design is a software and hardware’s combination that based on the PWM of spread to move and control system electric circuit. It’s more complicated to carry out the technique of PWM. On the software, make use of the result of exchanges examination, setting the SCM postpone and checking the form. The design not only used technique of SCM, but also synthesized the technique of the PWM of DC motor, the technique of exchanges examination and the technique of drive and control of LED, to carry out the control system of massage machine and persons interaction. Keywords: PW