塑胶件外观标准.docVIP

XBOX Plastic Part Workmanship Standards Document Number: D00015 Revision: C April 11, 2006 Confidential Disclaimer The information contained hereon is confidential, is submitted in confidence, and is proprietary information of Microsoft Corporation, and shall only be used in the furtherance of, the contract of which this document forms a part, and shall not, without Microsoft Corporation’s prior written approval, be reproduced or in any way used in whole or in part in connection with services or equipment offered for sale or furnished to others. The information contained hereon may not be disclosed to a third party without consent of Microsoft Corporation, and then, only pursuant to a Microsoft approved nondisclosure agreement. Published by Xbox Hardware Development Microsoft Corporation One Microsoft Way Redmond, WA 98052-6399 Revision History Revision Date ECO Description Author/Revised by Preliminary 3/7/01 Creation Jeff Reents A 8/4/01 Note Change to Lighting Jeff Reents B 9/7/01 Change Viewing Time Jeff Reents C 4/10/06 Change Level classifications to Class classification Jeff Reents Approvals Title Signature Date Mechanical Engineering: Jeff Reents 4/10/06 Mechanical Comodity Manager: Quality/Manufacturing Engineer:  Section Page 1.0 Purpose/Scope 5 2.0 Definitions/References 5 3.0 Definition of Surface Levels and Inspection Criteria 7 4.0 Printed Legends, Logo and Icons 10 5.0 Enclosures 13 1.0 Purpose/Scope Applies to all XBOX Plastic parts unless otherwise specified by Microsoft Corporation drawings or specifications or deviations/waivers. The intent of this standard is to provide a cost effective, cosmetically acceptable product for our customers. It is written to work in conjunction with Product Specification and other referenced Microsoft workmanship specifications. This document has precedence over customer detail drawings and workmanship specifications. 2.0 Defin