过程控制系统人机对话软件的设计.docVIP

摘 要 本设计完成了过程控制系统人机对话软件的设计与调试，重点介绍了北京亚控发展有限公司推出的软件“组态王6.5”的基本功能与运用，并且针对我国浙江中控软件技术有限公司推出的AE2000B标准型过程控制实验装置建立新组态王工程的一般过程：设计图形界面（定义画面）2.定义设备3.构造数据库（定义变量）4.建立动画连接5.运行和调试AE2000B标准型过程控制实验装置建立工程的过程图形画面动画连接AE2000B系统装置；优化界面； Abstract A Digital DC Power Supply is introduced in this paper, which bases on the microcontroller of the AT89S51 and the digital-to-analog chip of the DAC0832. The design is composed of power supply module, 4×4 keyboard module, microcontroller control module, D/A converter module, power amplifier module, over-current protection module and display module. The 4×4 keyboard as the input of the Digital DC Power Supply is a Program-Controlled Keyboard. The D/A converter chip controlled by microcontroller and the power amplifier module are the executive unit of this design, which achieves the digital control of the output voltage. The output voltage is dynamically displayed by a two bits digitron. When the output current exceeds 200mA, the design will run over-current protection immediately, and closed the output. The principle and the implementation of every module are introduced in the paper. And the method of how to use the AT89S51 to control the DAC0832 for carrying out the Numerical Control Direct Current Power Supply is emphasized. In addition, the paper also tells the realization method of the Program-Controlled Keyboard and the over-current protection. A data analysis of the production is given at last. It proves that the result matches the design requirements very well. Key words Digital DC Power Supply Program-Controlled Keyboard Dynamic Display Over-Current Protection D/A Conversion 目 录 摘要 I Abstract II 第1章 绪论 1 1.1 研究背景及意义 1 1.2 国内外研究现状 1 1.3 设计内容与要求 2 第2章 组态王6.5的安装和卸载 3 2.1 概述 3 2.2 安装组态王系统程序 3 2.3 安装组态王设备驱动程序 2.4 加密锁驱动程序的安装卸载组态王系统程序、驱动程序2.6 本章小结 6 第3章 建立新组态王工程的一般过程3.1 创建组态画面 错误！未定义书签。 3.2 定义IO设备建立动画连接构造数据库运行和调试3.6 本章小结 12 第4章 图形画面与动画连接 13 4.1 动画连接概述 13 4.2 动画连接详解 14 4.3 动画连接向导的使用 15 4.4 15 第5章 实例演示 16 5.1 AE2000B标准型过程控制实验装置 16 5