ME60业务跟踪培训.pptVIP

* PPPOE业务 [AAA][0006-5ba7-000b]:Receive authentication request from CM successfully(UserID = 9) AAA模块收到从CM模块发来的认证请求 [AAA][0006-5ba7-000b]:Send authentication request to LAM successfully(UserID = 9) AAA模块将收到的认证请求发给LAM模块进行认证 [LAM][0006-5ba7-000b]:Receive auth request from AAA successfully (AAA-index=9) LAM模块收到了从AAA模块过来的认证请求信息 [LAM][0006-5ba7-000b]:Authen sucess (AAA-index=9) LAM模块认证通过 [LAM][0006-5ba7-000b]:Send Auth Ack message to AAA successfully (AAA-index=9) LAM模块告诉AAA，用户已经认证通过 * PPPOE业务 [AAA][0006-5ba7-000b]:Receive authentication ack from LAM successfully(UserID = 9, Result = Success) AAA模块收到了LAM模块发来的用户已经认证通过的信息 [AAA][0006-5ba7-000b]:Send authentication ack to CM successfully(UserID = 9, Result = SRV_AUTH_PASS) AAA模块告诉CM模块用户认证已经通过 [CM][0006-5ba7-000b]:Receive AAA_AUTH_ACK from AAA (userid 9 AUTH_PASS) CM模块收到了AAA模块发来的用户已经认证通过的信息 [CM][0006-5ba7-000b]:Send AM_IP_REQ to AM (userid 9) CM模块向AM模块发请求，请求分配IP地址（NCP阶段开始） [AM][0006-5ba7-000b]:Receive IP address request from CM successfully( pool ID =0 ) AM模块收到了地址分配请求 * PPPOE业务 [CM][0006-5ba7-000b]:Receive AM_IP_ACK from AM (userid 9 ALLOCIP_OK) CM模块收到了AM发出的用户已经成功分配了IP地址的消息 [CM][0006-5ba7-000b]:Send PPP_AUTH_ACK to PPP (userid 9) CM模块向PPP模块发送用户认证成功的消息 [PPPOE][0006-5ba7-000b]:Receive config request packet(Session ID = 1) NCP协商阶段的报文 [PPPOE][0006-5ba7-000b]:Receive config ack packet(Session ID = 1) NCP协商阶段的报文 [PPPOE][0006-5ba7-000b]:Receive config request packet(Session ID = 1) NCP协商阶段的报文 * PPPOE业务 [PPPOE][0006-5ba7-000b]:Send up message successfully(Session ID = 1) PPPOE模块发出用户的PPP连接已经成功建立的消息 [CM][0006-5ba7-000b]:Receive PPP_CONN_UP from PPP (userid 9 CONN_UP) CM模块收到了PPP模块发出的用户的PPP连接已经成功建立的消息 [CM][0006-5ba7-000b]:Send FC_SET to FC (userid 9) CM模块要求FC模块建立用户的路由表项 [FC][0006-5ba7-000b]:Receive add user message from CM successfully FC模块收到了CM的请求 [CM][0006-5ba7-000b]:Receive FC_SET_ACK from FC (userid 9 ADD_OK) CM模块收到了FC模块已经成功建立用户路由表项的消息 * PPPOE业务常见的错误信息 错误信息 信息含义及可能原因 建议处理策略 Failed to process PADI packet,discard i