Motion control for a two-wheeled vehicle using a self-tuning PID controller_推荐.pdfVIP

ARTICLE IN PRESS Control Engineering Practice 16 (2008) 365–375 /locate/conengprac Motion control for a two-wheeled vehicle using a self-tuning PID controller Tsai-Jiun Ren, Tien-Chi Chen, Chun-Jung Chen Department of Engineering Science, National Cheng Kung University, Tainan, Taiwan, ROC Received 11 October 2006; accepted 26 May 2007 Available online 16 July 2007 Abstract This paper presents the motion control and stability analysis of a two-wheeled vehicle (TWV). The TWV is driven using two independent wheel motors, upon which a vehicle body is mounted. A mathematical model of the TWV is obtained using dynamic analysis. The TWV is inherently unstable and its motion is controlled through the actions of the wheel motors. Vehicle action depends on both the desired wheel response and the tilt angle. A self-tuning proportional-integral-derivative (PID) control strategy, based on a deduced model, is proposed for implementing a motion control system that stabilizes the TWV and follows the desired motion commands. The controller parameters are tuned automatically, on-line, to overcome the disturbances and parameter variations. Experimental results are presented to demonstrate the reliability and effectiveness of the proposed control scheme. r 2007 Elsevier Ltd. All rights reserved. Keywords: Two-wheeled vehicle; Self-tuning PID; Motion control; Stability; Neural 1. Introduction