HTRI_2005年成都年会-板式换热器相关培训班资料_Xphe1.pptVIP

Classic Design Specify case as usual Select Classic Design Run case Algorithm automatically adjusts specific geometry to achieve desired duty within pressure drop constraints Number of channels (plates) Number of fluid passes Pack configuration (how many channels of each type) Grid Design Specify case as usual Select Grid Design Select geometry to consider on Design Geometry panel Geometry parameters Range of geometry Run case Grid of cases is run over specified range of values Design Geometry Click check box to enable variation of item in design run Select different tabs to access all design geometry items Design Constraints Design options (Classic or Grid) will not select a design that violates constraints specified on this panel. Design Warnings Xphe flags (in Design View) any case that violates constraints specified on this panel, but may still be selected for final design Design View Program automatically selects best design. Best is smallest area with acceptable overdesign and no constraint violations. User may also select any alternate design. Lines in red indicate runs that violate design constraint (C) or design warning (W). Example 1Oil Cooler Open Example1.htri TEMA AEU oil cooler ?-in. tubes 10 ft long TEMA fouling factors ? Heat Transfer Research, Inc. All rights reserved. Confidential: For HTRI member use only. ? Xphe Workshop Workshop Goal Presenting capabilities Working a series of examples Learn how to use Xphe effectively by Schedule Morning Plate-and-frame geometry Process specifications Afternoon Fluid property specifications Design and analysis methods Program Description Xphe is a calculation engine/interface combination that calculates heat transfer and pressure drop performance for plate-and-frame exchangers. Overview Module 1 (Plate-and-Frame Geometry) Program capabilities Graphical user interface Module 2 (Process Specifications) Rating and simulations Performance parameters Xphe Geometry Plate-and-frame construction Rectangular plate