遥测设备地面测试平台标准化、模块化、产品化关键技术分析-analysis on key technologies of standardization, modularization and productization of telemetry equipment ground test platform.docxVIP

The Research of Key Technology for Standardized, Modularized and industrialized Ground Testing Platform of Telemetry EquipmentAbstractThe reliability of telemetry system is a key factor which dominates the success or failure of aircraft flight tests. The testing platform offers functional testing, fault detection and localization for the key equipment of telemetry system. To begin with, the thesis summarizes basic component part, development progress and current situation both here and abroad of standardized testing platform. The developments and trends of North University of China’s military ATE in the past 20 years are emphatically described. Starting from the analysis ofATS’ ATE basic model, we construct the UUT information model of excitation、response(PCM streams) and test. Proceeding from the angle of the test implementation, internal excitation, response and test methods are formed by the UUT working condition signal and the analog equivalent signal which provided by within of the testing system. Based on the idea of standardization, modularization and industrialization, this article implements the general technical research.First we propose the design of system-level communication protocol for the testing platform. At the same time we introduce detailed data buffer (protocol called register) which designed by the storage resources of the FPGA and the standardized functional board kernel control protocol which based on the register. The standardized the module registers function set and expanding the command set is in accordance with the unified allocation of test resources and UUT measuring point signal, and achieve the signal match, routes reach ability and resource optimization. The core idea of the kernel protocol is centralized control, which make various control signals into data. Simultaneously we introduce the type and structure of the asynchronous serial data standards packet, and formulate normative standard communication protocol, and control protoc