黄河三角洲地区高层建筑基础设计要点.docVIP

  • 2
  • 0
  • 约3.68千字
  • 约 7页
  • 2018-06-05 发布于福建
  • 举报

黄河三角洲地区高层建筑基础设计要点.doc

黄河三角洲地区高层建筑基础设计要点

黄河三角洲地区高层建筑基础设计要点   摘要:东营地区覆盖的图层为第四系泛黄冲击物,表层主要为第四系新近沉积粘性土、粉土及特细沙。基岩埋藏较深,地下水位一般在0.5到1.0米左右,地基承载力特征值一般在80千帕到100千帕,本文针对东营地区独特的地质特点进行分析,对小高层和高层建筑使用桩基础是比较可靠和经济的选择。   关键词:基础设计桩基高层基础经济性能   Abstract: dongying areas covered for the fourth layer of yellow impact content, surface mainly for the fourth is newly sedimentary cohesive soil, powder soil and special sand. Buried deep bedrock, groundwater level generally in 0.5 to 1.0 meters, characteristic value of subgrade bearing capacity is in commonly 80000 to 100000 from napa, this paper dongying unique area of the geological characteristics are analy

文档评论(0)

1亿VIP精品文档

相关文档