基于proe的触摸屏手机设计（论文）.doc

目录 目录 I 摘要 II ABSTRUCT III 1 绪论 1 1.1本课题研究的目的与意义 1 1.2三维造型设计的现状和发展 1 1.3 Pro/E软件介绍 2 1.4本文主要研究的内容 2 2 触摸屏手机外壳设计过程 3 2.1触摸屏手机外壳的结构分析与结构设计 3 2.2触摸屏手机外壳数据采集 4 2.3手机屏幕面板的设计 5 2.4手机前壳设计 6 2.5手机后壳的设计 11 2.6 物理按钮的设计 13 3 手机外壳的组装和生成爆炸图 14 3.1手机外壳的组装及渲染 14 3.2 触屏手机的分解视图 18 4 本文总结 19 致谢 20 参考文献 21 摘要 随着移动通信技术迅速发展，人民生活水平的不断提高，人们买手机除了讲究质量好坏，性能高地外，外观设计是否美观也成为人们考虑的一个重要方面。本文应用PRO/E软件完成了触摸屏手机的三维建模、虚拟装配。其中利用Pro/E的草绘模块、曲面模块、零件模块共同完成了手机屏幕、前壳、后壳和物理按钮等部件的设计，同时利用了Pro/E完成了组成部件的装配。这样在设计阶段就能直观、全面地反映设计意图，无需制造出昂贵的实物样品，即可分析产品结构、性能，及时发现设计问题，缩短设计开发周期，通过对各部件的设计，证明Pro/E软件在进行复杂的典型产品开发过程中具有简单、方便、快捷等特点，同时也证明了应用PRO/E对触摸屏手机进行结构设计既减轻了工作量，又节省了资金，大大提高了产品的设计开发效率，符合现代技术的发展要求。 关键词:触摸屏手机，Pro/E软件，虚拟装配 ABSTRUCT With the development of mobile communication technology,people used to buy cellphone with quality and performance. However people now are more prone to buy products with nice appearance besides the quality.this focuses on the folded cellphones’ structure and performance. In this paper，the three-dimensional modeling design of the touch screen mobile phone was designed by the software of PRO/E. Using Pro/E of the rough module, curved surface module, parts to complete the mobile phone screen module, former shell, shell and physical buttons, after the design of components, at the same time use the Pro/E finished components of the assembly. Through the design of parts, prove Pro/E in complex software in a typical product development process is simple, convenient, quick and other characteristics, So in the designing phase intuitive, reflect design intention, need not make expensive real sample, product structure, performance can be analyzed, and the timely discovery design problems, shorten the design development cycle ,at the same time proves Pro/E application to touch screen mobile phone structure design not only reduce the workload, and save money, greatly improving the product design development efficiency, comply with the requirements of the development of modern technology. Keywords: Touch sc