哈尔滨工业大学硕毕业论文模板.doc

Midterm report Course: Advanced Foundation Engineering Title：Transcona Grain Elevator, Canada Member：Duofa Ji、Xici Han、Shiwang Zhao、Zhimin Zhang  CONTENTS Abstract (Chinese) I Abstract (English) III Chapter 1 Introduction 1 1.1 Introduction of castellated and tapered members 1 1.1.1 Introduction to H-section steel 1 1.1.2 Summary of present research on lightweight portal frame 3 1.1.3 Summary of present research on tapered members 5 1.1.4 Summary of present research on castellated beams 7 1.2 Present research on cyclic plasticity model 9 1.3 Origin and significance of the research project 11 1.4 Main contents of the dissertation 11 Chapter 2 Static Analysis of cantilever tapered castellated members 13 2.1 Introduction 13 2.2 Solution to finite element nonlinear equations 13 2.3 Von-Mises yield criterion 13 2.4 Selection of the Elment 14 2.5 Effective length factors of cantilever tapered members under axial loads 15 2.6 Stability analysis of axial compression cantilever tapered castellated members 17 2.6.1 Distribution pattern of residual stress and member design 20 2.6.2 Ultimate strength analysis of axial compression cantilever cantilever tapered castellated members 23 2.6.3 Influence of steel strength 31 2.6.4 Limitation of opening rate 33 2.6.5 Stability design of tapered castellated members 35 2.7 Flexural strength analysis of cantilever tapered castellated members 37 2.7.1 Ultimate flexural strength and stiffness 37 2.7.2 Stiffness analysis 45 2.7.3 Stress and strain analysis of plastic zone 48 2.8 Planar stability analysis of cantilever tapered castellated beam-columns 55 2.8.1 Relative equations of beam-columns 55 2.8.2 Analysis of cantilever tapered castellated beam-columns 57 2.8.3 Plastic zone analysis 63 2.9 Summary 63 Chapter 3 Hysteresis behavior of cantilever tapered castellated members under cyclic loading 65 3.1 Introduction 65 3.2 Steel stress-strain model under cyclic loading 67 3.3 Hysteresis