【CT374】废料斗横移装置的设计毕业设计论文.docVIP

摘 要 本文主要对连续退火线——废料斗横移装置进行设计，通过UG,CAD软件进行建模和工程图的绘制。首先了解连续退火线机组的主要工艺流程，并认清废料斗横移装置在连续退火线机组中的位置及其主要功能；然后确定该装置工作原理及机械结构方案；根据已知参数，计算废料斗横移装置的所需的输出功率；根据输出功率进行电动机选型和驱动装置的设计。另外对一些重要的零部件进行设计，如：减速器选型计算，传动零件的设计计算，校核传动轴及轴承。最后通过UG,CAD软件完成建模和工程图的绘制。 关键词：废料斗横移装置，设计，计算，校核 ABSTRACT This article mainly introduced the design of the scrap bucket shifting device in the the continuous annealing line, through UG,CAD software. At first, the technological processor of the continuous annealing line have been known basically, and know about the position of Scrap bucket shifting device in the continuous annealing line, togethor with it’s mainly function. Then, though the operating principle about the device so that determines its mechanical structure. According to the known parameters, calculation of the transmission power; further according to the transmission power selects the type of motor-driven and designs the driving device; Additionally, designing some important parts, such as: the drive roller shaft design calculation, checks the shaft and bearings. Finally, completing the drawings of the scrap bucket shifting device through UG,CAD software. Key words: Scrap bucket shifting device，design，calculate，track. 目 录 1绪论---------------------------------------------------------------------------------------------------------------------1 1.1本课题的目的、意义---------------------------------------------------------------------------------------1 1.2国内外研究现状与发展趋势----------------------------------------------------------------------2 1.3研究方案-------------------------------------------------------------------------------------------------------5 2基本参数-------------------------------------------------------------------------------------------------------------6 2.1原始数据-----------------------------------------------------------------------------------------6 2.2 工作条件-----------------------------------------------------------------------------------------------------6 3总体设计-------------------------------------