英文翻译一种新的计算方法用于实双工件在冲压排样设计中的最佳规划方法.docVIP

编号： 毕业设计(论文)外文翻译 （原文） 学 院： 机电工程学院 专 业：机械设计制造及其自动化 学生姓名： 学 号： 指导教师单位： 机电工程学院 姓 名： 职 称： 副教授 题目类型：(理论研究 (实验研究 (工程设计 (工程技术研究 (软件开发 2010年5月16日 Abstract In stamping, operating cost are dominated by raw material costs, which can typically reach 75% of total costs in a stamping facility. In this paper, a new algorithm is described that determines stamping strip layouts for pairs of parts such that the layout optimizes material utilization efficiency. This algorithm predicts the jointly-optimal blank orientation on the strip, relative positions of the paired blanks and the optimum width for the strip. Examples are given for pairing the same parts together with one rotated 180o, and for pairs of different parts nested together. This algorithm is ideally suited for incorporation into die design CAE systems. This paper focuses on how computer aided engineering(CAE) allows engineers at early stages of product sign to predict and optimize mold filling, resid ualstress, structural response and post-processing shrink a geand warp age of the final part. The material properties and characteristics of the final part are highly influenced by the flow pattern, temperature and curing of the material inside the mold. The use of these tools has been used to solve design problems at early stages and avoid expensive and time consuming trial-and-error procedures and mold modifications resulting after the mold is manufactured. Keywords: Stamping；Die Design；Optimization； Material Utilization； Minkowski Sum；Design Tool Introduction In stamping, sheet metal parts of various levels of complexity are produced rapidly, often in very high volumes, using hard tooling. The production process operates efficiently, and material costs can typically represent 75% of total operating costs in a stamping facility [1]. Not all of this material is used in the parts, however, due to