凹版印刷机刮墨刀的有限元分析分析-finite element analysis of doctor blade in gravure printing machine.docxVIP

press. It has certain theoretical and practical application meaning.Key words: Gravure machine; Doctor Blade Mechanism; ANSYS; Modal Analysis; wipe angle目 录1 绪论 ............................................................................................................................................ 11.1 凹版印刷机工作原理与结构 .......................................................................................... 11.1.1 凹版印刷的原理 ................................................................................................... 11.1.2 凹版印刷机的主要结构 ....................................................................................... 11.2 凹版印刷机刮墨刀机构现状与特点 .............................................................................. 21.2.1 凹版印刷机刮墨刀机构现状 ............................................................................... 21.2.2 凹版印刷机刮墨刀机构的特点 ........................................................................... 21.2.3 与刮墨刀相关的印刷质量问题 ........................................................................... 61.3 本课题研究的目的及意义 .............................................................................................. 71.4 本课题研究的主要内容与任务 ...................................................................................... 72 刮墨刀机构的振动模态分析 .................................................................................................... 92.1 模态分析理论 .................................................................................................................. 92.1.1 模态分析的基本概况 ............................................................................................ 92.1.2 模态分析的基本原理 ............................................................................................ 92.1.3 刮墨刀机构固有频率理论计算 .......................................................................... 102.2 ANSYS 模态分析 122.3 有限元分析基本步骤 .................................................................................................... 132.3.1 建立刮墨刀机构的三维模型 ....................................