滚筒式输送机的的设计.doc

滚筒式输送机的设计 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 34 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 1摘要 Abstract PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 35 PAGE \* MERGEFORMAT 3 PAGE \* MERGEFORMAT 3滚筒式输送机的设计摘要 本设计简要介绍了辊子输送机的作用，在对辊子输送机特点和形式了解之后，对辊子输送机总体方案进行设计。总体方案确定后是各个零部件的设计，重点对辊子输送机的主要参数、链传动牵引力理论计算、辊子间距、辊子直径、支撑架、脚、轴承等零件进行设计，选择合适的动力源和合适的传动系统及速度控制系统，为合理地设计辊子输送机提供了依据。在总体方案和个零件的参数确定后，应用Pro/E软件对个零件建模和运动仿真。关键字：作用；主要参数；设计；建模；仿真Design of roller conveyorAbstract  This design introduce the roller conveyor briefly. After know about characteristics and form of roller conveyor,design the overall scheme of roller conveyor . It is the design of various components after the overall scheme is given. Focusing on the designing of the main parameter, chain drive traction theoretical calculations, roller spacing, roller diameter, cage, feet, bearings and other parts of roller conveyor , select the appropriate power source and a suitable transmission and speed control systems, in older to provide the basis for the rational design of roller conveyor . After the overall program and parameter are determined ,then ,in application the softer of Pro/E to build the construction of three-dimensional model and motion simulation.Keyword: effect; main parameters; design; modeling; simulation目录目 录TOC \o 1-3 \h \u HYPERLINK \l _Toc28360 摘要 PAGEREF _Toc28360 6 HYPERLINK \l _Toc24198 Abstract PAGEREF _Toc24198 7 HYPERLINK \l _Toc7962 第一章： 开题报告 PAGEREF _Toc7962 9 HYPERLINK \l _Toc10025 第二章： 总体方案的设计 PAGEREF _Toc10025 13 HYPERLINK \l _Toc1549 2.1 机构形式 PAGEREF _Toc1549 13 HYPERLINK \l _Toc18141 2.1.1 输出方式的选择： PAGEREF _Toc18141 13 HYPERLINK \l _Toc25573 2.1.2 传动方式的选择： PAGEREF _Toc25573 14 HYPERLINK \l _Toc18068 2.1.3 辊子支撑方式的选择： PAGEREF _Toc18068 14 HYPERLINK \l _Toc10403 第三章： 参数设计及验算 PAGEREF _Toc10403 15 HYPERLINK \l _Toc32214 3.1 辊子的布置 PAGEREF _Toc32214 15 HYPERLINK \l _Toc32525 3.2 辊子的尺寸及受力分析 PAGEREF _Toc32525