STM32之PVD电压检测.docVIP

HYPERLINK javascript:; STM32之PVD电压检测 (2012-07-18 16:06) HYPERLINK /space.php?uido=tag 标签:? HYPERLINK /space.php?uido=tagid=515003 STM32? HYPERLINK /space.php?uido=tagid=515993 PVD? 分类： HYPERLINK /space.php?uido=blogfrmd=0classid=160936view=me STM32 HYPERLINK /attachment/attach/26/43/59/87264359874272050d854433b0f6ab7e66f1a61ff2.rar \t _blank ?EXAMPLE_PWR.rar ??如果VDD或者VDDA电压高于或低于PVD设定阈值都产生中断，表现为每中断一次，LED1就亮变灭或者灭变亮。 点击(此处)折叠或打开/******************************************************************************** ??* @file PWR/PVD/main.c ??* @author MCD Application Team??* @version V3.4.0??* @date 10/15/2010??* @brief Main program body.??******************************************************************************/ /* Includes ------------------------------------------------------------------*/ #include stm32f10x.h#include stm32_eval.hvoid EXTI_Configuration(void);void NVIC_Configuration(void);/**??* @brief Main program.??* @param None??* @retval None??*/int main(void){??/*! At this stage the microcontroller clock setting is already configured, ???????this is done through SystemInit() function which is called from startup???????file (startup_stm32f10x_xx.s) before to branch to application main.???????To reconfigure the default setting of SystemInit() function, refer to???????system_stm32f10x.c file?????*/ ??/* Initialize LEDs and Key Button mounted on STM3210X-EVAL board */??STM_EVAL_LEDInit(LED1);????GPIO_SetBits(GPIOC, GPIO_Pin_7);??/* Enable PWR and BKP clock */??RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);//电源管理部分时钟开启 ??/* Configure EXTI Line to generate an interrupt on falling edge */??EXTI_Configuration();??/* NVIC configuration */??NVIC_Configuration();???/* Configure the PVD Level to 2.9V */??PWR_PVDLevelConfig(PWR_PVDLevel_2V9);// 设定监控阀值 ??/* Enable the PVD Output */??PWR_PVDCmd(ENABLE);// 使能PVD ????while (1)??{??}}/**??* @brief Configures EXTI Lines.??* @param None??* @retval None??*/void E