显示各种图像与汉字但要更改相应部分.docVIP

/*******************************************************项目名称：显示各种图像的程序作者所在单位：电子科技大学作者：吴鉴鹰*******************************************************/#includestdio.h#includereg52.h#includemath.h#includeintrins.hsbit RS=P0^0;sbit RW=P0^1;sbit E=P0^2;sbit PSB=P0^3;sbit RES=P0^4;E=1 ;byReturnValue=Lcd_Bus ;E=0 ;return byReturnValue ;}/*增加画点子程序函数功能：在坐标为（x,y)点画一个点参数意义X：12864屏幕的横坐标，范围是0到128(从左到右)Y:12864的纵坐标，范围是0到64(从上到下)Color：为1的时候表示为黑点*/void DrawPoint(unsigned char X,unsigned char Y,unsigned char Color){unsigned char Row,Tier,Tier_bit ;unsigned char ReadOldH,ReadOldL ;write_com(0x34);write_com(0x36);Tier=X4 ;Tier_bit=X0x0f ;if(Y32){Row=Y ;}else {Row=Y-32 ;Tier+=8 ;}write_com(Row+0x80);write_com(Tier+0x80);ReadByte();ReadOldH=ReadByte();ReadOldL=ReadByte();write_com(Row+0x80);write_com(Tier+0x80);if(Tier_bit8){switch(Color){case 0 :ReadOldH=(~(0x01(7-Tier_bit)));break ;case 1 :ReadOldH|=(0x01(7-Tier_bit));break ;case 2 :ReadOldH^=(0x01(7-Tier_bit));break ;default :break ;}write_data(ReadOldH);write_data(ReadOldL);}else {switch(Color){case 0 :ReadOldL=(~(0x01(15-Tier_bit)));break ;case 1 :ReadOldL|=(0x01(15-Tier_bit));break ;case 2 :ReadOldL^=(0x01(15-Tier_bit));break ;default :break ;}write_data(ReadOldH);write_data(ReadOldL);}write_com(0x30);}void main(void){uchar i,j,colour=1,T=0;RW=0 ;lcdreset();ceshi();clrgdram();delay(2000);clrscreen();while(1){for(i=0;i128;i++){j=32-32*sin(2*i*3.14/(64+T));DrawPoint(i,j,colour); }//T+=4;delay(5000);}while(1);}#define LCD12864_DatePort P2bit LCD12864_CheckBusy() //读忙碌状态{ bit i; RS=0; RW=1; E=1; LCD12864_DatePort=0xff; delay_ms(1); i=(bit)(LCD12864_DatePort0x80); E=0; return(i);}void LCD12864_DrawPoint( unsigned char X, unsigned char Y, unsigned char Color ){ unsigned char Row , Tier , Tier_bit ; unsigned char ReadOldH, ReadOldL ; LCD12864_WriteCmd( 0x34 ) ; LCD12864_WriteCmd( 0x36 ) ; Tier = X 4 ; Tier_bit = X 0x0f ; if( Y 32 ) { Row = Y ; } else { Row = Y - 32 ; Tier +