牙冠疾病教学课件.pptVIP

The Fabrication of The Metal Ceramic Crown Section 9 Impressions: Prpearation rinse and dry the prepared teeth without leaving residue select suitable tray or fabricate individual tray material selection:utilize silicone rubber to get final impression Prerequisites for the impression： The impression is complete with clear surface details and cervical margin Enough coverage including abutments and adjacent teeth Exactly reflect the condition of the abutments Model pouring： Material spatulation:artificialstone.The impression should be rinsed and dried before pouring. Pouring：vibrate the tray so as to keep the model bubble-free. Detachment：1 hour Trimming：trim the model according to the appearance of natural denture with the requisition of clear cervical margin and correct articulation Fabrication of the metal framework Fabracation of the Removable die use die-spacers waxing：anterior tooth labial0.3-0.5mm， lingual cervical margin 0.5mm carve the contour occlusal adjustment finish the wax pattern Notice of the wax patterns： Thickness：thick－easy to distort and contract thin－fagile Contour：smooth without sharp edges and corners Occlusal relation Method protecting wax contraction：remove the wax pattern after completely cooling Management of the metal framework ： Coarse grinding Sandblasting：80-100 grit quartz purpose：get rid of the hesion and oxide on casting’s surface so as to form coarsening surface Rinsing：ultrasonic cleaner Preoxidation Porcelain addition： Method to add opaque porcelain The color of opaque porcelain: mask the color of base metal alloy Porcelain addition Sintering Process the cervical margin Method to add opaque porcelain: Add porcelain：1-1.5mm，incisal 2-2.5mm. vibrate and shrink to keep bubble-free Incisal porcelain Finish the contour according to anatomical appearance of crown and articulation Notice of porcelain addition a