面向可制造性的连续体结构拓扑优化方法分析-analysis of topology optimization method for manufacturability - oriented continuum structures.docxVIP

II Abstract The continuum structure topology optimization techniques is the crucial technology in product designing, which finds the optimal material density distribution under the determined loads and constraints, so that the layout of the whole structure could be more scientific, reasonable. Because the results of the current structure topology optimization approach have poor manufacturability, the topology optimization techniques only can be a supporting approach for conceptual design. How to efficiently bridge the distance between concept design and the actual manufacturing and increase the manufacturability of results is the key to realize topology optimization methods for manufacturing. This paper analyzed the research status in the field of topology optimization, and studied the model building, optimization solving algorithms of topology optimization methods for manufacturing. The main works of this dissertation can be summarized as follows: First of all, this paper analyzed the research status of domestic and abroad on the fie ld of topology optimization, studied the model building, optimization solving algorithms and engineering constraints and post-processing techniques, compared the advantages and disadvantages of the SIMP (Solid Isotropic Microstructures with Penalization) method, the Level Set Method, and PLSM (Parameterization Level Set Method). Secondly, based on the existing research, this paper provides the general mathematical model of the continuum structure topology optimization for manufacturing, adopts new numerical methods to solve topology optimization problems with symmetric constraint and dimensional constraint. Several test examples have been carried out and comparative analysis of the results prove that the proposed method has superiority of efficiency. Thirdly, aimed at the post processing for topology optimization based on variable density method, this paper studied the algorithm flow of the existing B-Spline interpolation m