影响粒度测试结果因素以与测量方法建立.pptVIP

* General-purpose sample tray Designed for bulk powders Gates – designed to regulate the flow of free-flowing powders Start with a wide gap and only close the gap if the powder is free flowing Feed rate - Set-up so that sample moves smoothly down the tray and obscuration does not exceed 5% * Small and Micro volume trays… Designed for smaller sample volumes Also good when sample is low density and/or not free-flowing (cohesive) May not be possible to make repeat measurements as the sample feeds so several repeat aliquots may need to be measured * Obscuration filtering is used to