SRC组合板试验研究和性能分析-结构工程专业论文.docxVIP

中文摘要 港口码头钢筋混凝土面板抢修要求施工方便、快速，避免使用大型施工机 械，应急使用完成后只需进行简单加固处理即可作为永久性构筑物长期使用。对 此本文提出一种新型组合板：SRC（Steel-Reinforced Concrete）组合板，目的是 解决普通钢-混凝土组合板中压型钢板厚度小﹑构件刚度差、组合板承载力低的 缺陷。SRC组合板分两阶段使用，第一阶段,在钢板上每隔一定间距焊有型钢作 为钢承板抢修使用，满足时效要求；第二阶段,在钢承板上浇筑混凝土后，即形 成组合板投入正常使用。SRC组合板将应急使用和长期利用结合起来，具有独特 的优越性。 SRC组合板在囯内外尚无研究报道。本文通过试验对SRC组合板的受力性能 进行了研究，分析了型钢类型、销钉数量、组合板厚度等因素对SRC组合板受力 性能的影响。研究内容主要包括：组合板的破坏机理、受力性能和变形性能。通 过试验研究和分析，找出了用于组合板的合理的型钢类型；提出了考虑型钢与混 凝土之间滑移的组合板挠度、屈服强度、极限强度的计算公式；提出了承载力及 变形计算公式。 同时，本文对SRC组合板进行了非线性有限元分析。通过建立有限元模型， 利用ANSYS有限元分析软件模拟试验全过程，最后，对数值分析结果和试验结 果进行了比较分析，结果吻合较好。 关键词：SRC 组合板、滑移、延性、有限元 ABSTRACT Emergency repair of the port’s construction of reinforced concrete structures required convenient, fast, avoid using large construction equipment and emergency use only after the completion of a simple reinforcement can be as long-term use of permanent structures. This paper proposes a composite slab: SRC (Steel-Reinforced Concrete) composite slab, mainly to solve thin thickness of profiled steel sheet in common steel-concrete composite slab, poor stiffness of the member and low carrying capacity of the composite slabs. SRC composite slab used in two stage, the first stage, the steel panel which the section steel is welded on steel sheet at regular intervals can be emergency use , to meet the timeliness requirements; the second stage, pouring concrete in the steel panel, the composite slab that is formed can put into normal use. It has a unique advantage to a certain extent that combined emergency use with long-term use. SRC composite slab did not study at home and abroad reported. In this article, mechanical properties of composite slab were studied and analyzed on experiment, and the main effect factors on the mechanical properties of SRC slab was analyzed in the test such as section steel types, stud number, thickness of composite slab. The failure mechanism, mechanical properties and deformation properties of the composite slab was incuded in the study. Through experimental research