UV固化设备及工艺参数优化-机械工程专业论文.docxVIP

上海交通大学工程硕士学位论文摘要 上海交通大学工程硕士学位论文 摘要 II II 主，不同指标的各工艺参数交互作用影响不尽相同。本文根据试验所得的回 归方程建立了每个品质指标的工艺参数优化数学模型，并用 design-expert 工具对数学模型进行求解、统计选优和模型验证，得到了各试验指标的优化 参数组合。综合各试验指标的各优化参数组合，认为在本试验条件下的优化 工艺参数组合为：辐照强度 215.2mw/cm2～221.7mw/cm2,涂层厚度 18.6 um～ 18.9um, 固化温度 54.4℃～54.6℃,辐照时间 6.1s～6.3s。 本论文的研究为企业同类制程工艺参数的优化提供了一种研究途径，试 验获得的数据为 UV 固化机的设计提供了理论参考依据。 关键词 Notebook 印刷紫外线固化，多因素多指标，二次回归设计，参数 优化 III III OPTIMIZATION OF UV CURING EQUIPMENT AND PROCESS PARAMETERS ABSTRACT UV curing technics is a process that material with chemistry reaction activity is solicited by UV energy from liquid state into solid state rapidly. Compared with traditional heat-curing technics, UV curing technics has many advantages, such as low curing temperature, rapidly reacting speed, energy saving, environmental conservation and complete reaction, so in Notebook enclosure surface-decorated field, more and more printing technics begin to apply UV curing technics to production practice instead of traditional technics. As for the UV curing process of Notebook enclosure printing, there are several factors influencing on the quality of UV coatings. Because of determinating process parameters was so difficult that much time was often spent in adjusting them, which influenced the production and wasted the resources. Therefore, investigation on the optimization of process parameters for Notebook enclosure UV curing technics has an important value in instructional significance and practical applications. In recent years, most studies on optimization of process parameters of UV curing technics have been concentrated on a single index, rather than multi-factor and multi-index. In current work, the UV curing machine homemade was used as PAGE PAGE IV tester, main process parameters (radiation intensity, coating thickness, curing temperature and radiation time) were regarded as influencing factors, and main testing items (adhesion, abrasion, gloss and solvent durability) were regarded as indexes of quality evaluation, proc