X形配筋增强异形柱节点受力性能有限元分析-结构工程专业论文.docxVIP

Finite element models of structure with Z-shaped column joint are established according to the experiment about concrete structure with Z-shaped columns joints. The bearing capacity of model are compared with the results of experiment to demonstrate the reliability of the model. Two pairs of X- reinforcement are set in both sides of the web to analyze the difference of stress performance in Z-shaped column joint which is caused by X-reinforcement. The influence of X-shaped reinforcement on mechanical behavior is analyzed by changing the diameter of X-shaped reinforcement and beam bar. The results show that shear capacity can be improved by adding the X-shaped reinforcement in joints,but the influence is not significant. X-shaped reinforcement shares the shear force which was originally carried by concrete and stirrup. KEY WORDS：specially shaped column; joint; X-shaped reinforcement; mechanical behavior; finite element analysis 目 录 HYPERLINK \l _bookmark0 第一章 绪论 1 HYPERLINK \l _bookmark1 1.1 研究背景及意义 1 HYPERLINK \l _bookmark2 1.2 国内外框架节点研究 2 HYPERLINK \l _bookmark3 1.2.1 矩形柱框架节点 2 HYPERLINK \l _bookmark4 1.2.2 节点受力模型 3 HYPERLINK \l _bookmark5 1.2.3 异形柱框架节点 5 HYPERLINK \l _bookmark6 1.3 X 形配筋应用研究现状 7 HYPERLINK \l _bookmark7 1.3.1 X 形配筋受力原理 7 HYPERLINK \l _bookmark8 1.3.2 X 形配筋在梁柱中的研究 8 HYPERLINK \l _bookmark9 1.3.3 X 形配筋在框架节点中的研究 9 HYPERLINK \l _bookmark10 1.4 存在的问题 9 HYPERLINK \l _bookmark11 1.5 本文研究内容 10 HYPERLINK \l _bookmark12 第二章 增设 X 形配筋 T 形柱节点有限元分析 11 HYPERLINK \l _bookmark13 2.1 增设 X 形配筋钢筋混凝土 T 形柱节点试验 11 HYPERLINK \l _bookmark14 2.1.1 试件设计 11 HYPERLINK \l _bookmark15 2.1.2 材料属性 13 HYPERLINK \l _bookmark16 2.1.3 加载装置及加载制度 14 HYPERLINK \l _bookmark17 2.2 有限元模型的建立 15 HYPERLINK \l _bookmark18 2.2.1 有限元模型选取 15 HYPERLINK \l _bookmark19 2.2.2 有限元单元选取 16 HYPERLINK \l _bookmark20 2.2.3 材料本构和破坏准则 18 HYPERLINK \l _bookmark21 2.2.4 网格划分 21 HYPERLINK \l _bookmark22 2.2.5 边界条件与加载设置 24 HYPERLINK \l _bookmark23 2.3 模型验证 24 HYPE