不同剪跨比下再生混凝土叠合梁抗剪性能研究结构工程专业论文.docxVIP

II II Abstract In recent years, many countries have carried out recycled concrete. Recycled concrete is applied to practical engineering, which have played an important to protect environment and save resources. At present, at home and abroad of learned men mainly focus on the regeneration performance of concrete material, but they have less researched on the mechanical properties, especially the composite member. Recycled concrete composite beam has the advantages of light weight, steel consumption, short construction period, comprehensive cost advantages, which is used in engineering that can obtain great economic benefit. In order to study the possibility of using recycled concrete to the to the composite beam in, based on the experiment of 4 recycled aggregate concrete composite beams and 4 reinforced concrete composite beam, recycled concrete composite beam failure mode, the cracking load and the shear capacity are investigated. The effects of different shear span ratio of recycled aggregate concrete composite beam strirrup strain, deflection and width of the diagonal crack are studied, too. The main conclusions are as following: Recycled concrete composite beam failure process with ordinary concrete composite beams are similar, it is also elastic, cracking, yielding and failure stages and show the stress characteristics of the corresponding in the whole loading process. In the diagonal crack not appearing, recycled concrete composite beams are no significant changes in the stirrup strain,and they are similar with ordinary concrete composite beams. When the diagonal crack, recycled concrete composite beams of stirrup strain increases faster. And it increases with the increase of shear span ratio. Under the same vertical load, the recycled concrete composite beams of stirrup strain are larger than that of ordinary concrete composite beams. In the same load and shear span ratio, the maximum diagonal crack width of recycled concrete composite beams are larger than