本科优秀毕业设计任意波形信号发生器.docVIP

毕业设计(论文) 任意波形信号发生器 摘 要 任意波形发生器是信号源的一种，它是具有信号源所具有的特点，更因它高的性能优势而倍受人们青睐。信号源主要给被测电路提供所需要的己知信号(各种波形)，然后用其它仪表测量感兴趣的参数。可见信号源在各种实验应用和试验测试处理中，它不是测量仪器，而是根据使用者的要求，作为激励源，仿真各种测试信号，提供给被测电路，以满足测量或各种实际需要。 本论文的主要任务是基于DDS技术，AD760为核心，89C52单片机作为控制器设计一个性能优良的任意波形发生器。论文中主要对微机控制的任意波形发生器的软硬件设计进行了相应的研究，由CPU, DAC，计数器，定时器模块组成主要是用于对上层波形数据的接收，存储，同时可以单独使用，通过CPU向DAC发送所需波形数据。 软件部分是开发一个任意波形发生器的波形编辑软件。通过该软件用户可以设置各种波形参数，进而控制硬件模块产生相应的波形信号通过串口下载到硬件系统。该软件集中体现了任意波形发生器的“任意”性，它具有强大的波形生产、编辑及处理功能。波形生产方式包括数学函数产生波形、手动绘制波形;可以改变波形的幅度和相位。最后概括总结了全文，给出了结论，并说明了系统设计中待改进的工作。 关键词 任意波形、DDS、89C52 Abstract The Arbitrary Waveform Generator is one kind of the signal source, it has the characteristics that there are the signal sources, favored by people because of its high performance advantage. The signal source provides the known signals needed for circuit-under-test mainly (various kinds of wave forms), then measure the parameter that is interested in with other instrument. It is obvious the signal source is used and test testing while dealing with in various kinds of experiments, it is not a measuring instrument, but according to the request of user, as encourage source ,emulation various kinds of test signal, offer to the circuit-under-test, in order to meet measurement or various kinds of actual needs. The main task of this thesis is to develop the core of regarding digital simulation chip AD760 of AD Company as because of DDS technology , Cygnal Company 89C52 one-chip computer designs a of good performance Arbitrary Waveform Generator as the controller .Thesis design corresponding research to Arbitrary Waveform Generator and hardware of generator that computer control mainly ,by CPU, DAC, the counter，timer module is it is it receive to upper strata waveform datum to used for mainly to make up, store, can use alone at the same time, send thenecessary waveform data to DAC through CPU. The part of the software is the software for editing of waveform whichdevelops a Arbitrary Waveform Generator. Ca