自冷却热管车刀切削性能分析-analysis on cutting performance of self - cooling heat pipe turning tool.docxVIP

Abstract With the development of society and people’s environment awareness have gradually improved, the green manufacturing is the heading of cutting processing with no pollution, energy saving and environmental protection. Do not use cutting fluids or use less cutting fluids become the trend of the cutting development. But, how to scattered the heat of the centralized heat of cutting area is the focus of research recently. Based on this problem, the superconductor-heat pipe was used in cutting processing. The problem of the cutting heat concentrated is solved by the heat pipe which has high efficiency heat conduction and constant temperature properties. Base on this concept, the heat pipe lathe tools were designed. The cutting force, cutting temperature, cutting power, residual stress and temperature field of lathe tools was investigated by the comparative experiment and finite element simulations. The main content of this paper was briefly described as follows: The design idea of heat pipe cutting tools was put forward from theoretic, and the heat pipe type and working medium of choice were introduced in this paper. The efficient heat conduction performance and constant temperature characteristics were verified by experimental study of heat pipe. The single factor experiment method was used in cutting performance experiment of the heat pipe tools. For the practical application of heat pipe lathe tools provides the basis, the different of cutting force, cutting temperature and residual stress were researched between the heat pipe lathe tools and common lathe tools. The cutting parameters on the effect of cutting process were researched by the finite element analysis method, and the 3D model of heat pipe lathe tools was established. Heat pipe can effective scatter the heat of cutting area was proved by using finite element analysis and contrastive method, and the concentrated heat problem gets alleviating. The characteristics of the heat pipe lathe tool are speed