【毕业论文】毕业设计外文翻译--可视化的PLC程序使用XML.docVIP

PAGE 河 北 农 业 大 学 毕业设计(论文)外文资料翻译 院（系）： 机电工程学院 专 　业： 机械设计制造及其自动化 姓 名： 刘利宝 学 号： 2009212010101 外文出处：Visualization of PLC Programs using XM Juniorprofessorship Agentenbased Automation University of Kaiserslautem 附 件： 1.外文资料翻译译文；2.外文原文。 完成日期： 　2011 年　4　月　30 日 1 Abstract 1 Visualization of PLC Programs using XML M.Bani younis and G.Frey 1 Abstract Due to the growing complexity of PLC programs there is an increasing interest in the application of formal methods in this area. Formal methods allow rigid proving of system properties in verification and validation. One way to apply formal methods is to utilize a formal design approach in PLC programming. However, for existing software that has to be optimized, changed, or ported to new systems .There is the need for an approach that can start from a given PLC program. Therefore, formalization of PLC programs is a topic of current research. The paper outlines a re-engineering approach based on the formalization of PLC programs. The transformation into a vendor independent format and the visualization of the structure of PLC programs is identified as an important intermediate step in this process. It is shown how XML and corresponding technologies can be used for the formalization and visualization of an existing PLC program. Programmable Logic Controllers (PLCs) are a special type of computers that are used in industrial and safety critical applications. The purpose of a PLC is to control a particular process, or a collection of processes, by producing electrical control signals in response to electrical process- related inputs signals. The systems controlled by PLCs vary tremendously, with applications in manufacturing, chemical process control, machining, transportation, power distribution, and many other fields. Automation applications can range in complexity from a