- 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
- 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
- 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
梳针分梳板隔距对棉纱毛羽影响
梳针分梳板隔距对棉纱毛羽影响
摘要:用YG172型纱线毛羽仪对梳棉机刺辊下采用梳针分梳板、锯齿分梳板、小漏底在不同加工条件下所加工的棉纱进行了毛羽检测,结果显示:采用梳针分梳板,隔距为1.5 mm时最有利于棉纱毛羽的减少,0.9 mm时次之,0.6 mm时最不利于棉纱毛羽的减少;采用锯齿分梳板,同样是隔距为1.5 mm时最有利于棉纱毛羽的减少,0.9 mm时次之,0.6 mm时最不利于棉纱毛羽的减少;在所有方案中对于棉纱毛羽的减少,以梳针分梳板采用1.5 mm隔距最有利于毛羽的减少,梳针分梳板采用0.6 mm隔距方案最差。和刺辊下加装小漏底相比,总体上采用梳针分梳板和锯齿分梳板更有利于棉纱毛羽的减少 (分梳板隔距为0.6 mm时除外);在隔距较小条件下,梳针分梳板减少棉纱毛羽效果不如锯齿分梳板,在隔距较大的条件下,梳针分梳板减少棉纱毛羽效果要好于锯齿分梳板,规律性明显。
关键词:梳棉机;梳针分梳板;锯齿分梳板;小漏底;隔距
中图分类号:TS111.9 文献标志码:A
Effect of Gill Pin Carding Plate Gauge on Cotton Yarn Hairiness
Abstract: In this paper, the effect of the gauge of gill pin carding plate on cotton yarn hairiness was investigated. The cotton yarns produced by respectively installing gill pin carding plate, saw-tooth carding plant and taker-in grid under the taker-in to the card were tested with YG172 yarn hairiness tester. The results show that: (1) when installing gill pin carding plate, the gauge of 1.5 mm is most beneficial to the reduction of cotton yarn hairiness; (2) when installing saw-tooth carding plate, the gauge of 1.5 mm is also most beneficial to the reduction of cotton yarn hairiness, followed by the gauge of 0.9 mm, while the gauge of 0.6 mm is most unfavorable to the reduction of cotton yarn hairiness; (3) in all the programs for reducing cotton yarn hairiness, gill pin carding plate with the gauge of 1.5 mm is the best choice, saw-tooth carding plate with the gauge of 0.6 mm is the worst; (4) compared to installing taker-in grid under the taker-in, installing gill pin carding plate and saw-tooth carding plate are more conducive to the reduction of cotton yarn hairiness in general (except for the case when carding plate gauge is 0.6 mm). When a smaller gauge is used, gill pin carding plate is inferior to saw-tooth carding plate in term of reducing cotton yarn hairiness; but when a larger gauge is used, the former outperforms the latter and this regularity is very obvious.
Key words: card; gill pin carding plate; saw-tooth carding plate; taker-in gr
文档评论(0)