半导体激光器高温定度电源的分析-测试计量技术及仪器专业论文.docxVIP

华 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract Semiconductor laser diode is a minitype laser diode based on PN knot formed by direct bandgap semiconductor material. Semiconductor laser diode is a kind of device with high power density and sky-high quanta efficiency. Its ability to withstand the impact of weak ，even weak drive current and temperature changing will lead to its large changing of output light power and device parameters, which directly damages the safe use of laser diode. Thus the design and experimental study of laser diode current source-driven is of particular importance This paper introduces a semiconductor laser high stability constant current drive system and its circuit design of the experimental results Analysis. It includes constant-current drive, temperature control and protection circuits .The constant current drive circuit is composed of voltagebenchmark circuit, voltage-current conversion circuit and adjusting circuit. The whole design idea is to use Super Chopper-Stabilized Amplifier and principle of negative feedback to stabilize output current which obtains the lowest current error and the highest current stability. If we want to improve the constant current driver reliability and stability, we must consider the choice of parts and solve dispersing heat. From these devices as above, the stability of current is superior to 2.67 ?10?4 . The paper design protect circuit such as delay-Soft Start to guarantee the safe of laser diode. Temperature control module work as the follows: firstly through the acquisition platinum resistance temperature, secondly go through feedback loop, to be precise margin, Then PID control for precision. The system have enable to control temperature Real-time and stable. Thermostat controller module used to control the temperature of lasers, lasers are generally guaranteed in constant temperature. Finally, the paper discusses the question at present and the developing direction in future. Key words: Semiconductor laser