变充填度裂隙渗流应力特性研究-安全科学与工程专业论文.docxVIP

Abstract 万方数据 Abstract Along with our country the rapid development of engineering construction, especially for the further research of rock mass engineering problems found by the underground water level fluctuation and rainfall caused by rock mass engineering problems such as safety problem more and more, the design of the slope rock mass, and the development of the mine drainage, groundwater exploitation and development of oil and gas exploration problems all involved in rock mass hydraulics performance. There are complex in rock mass, irregular filling cracks, the stress field of rock mass of confining pressure lead to deformation of crack extension, filling material and the change of the fracture seepage are the underlying causes of the damage of rock fracture. For most of the rock mass seepage problem, rock fracture under a certain degree of normal stress, therefore, study method to stress under the action of filling material deformation influence on seepage is the base of analysis of rock mass hydraulics. At home and abroad in this paper, through summarizing about without filling rock fracture and has a filling cracks in the rock mass stress under the action of deformation and seepage characteristics of research status quo, on the basis of the different nature of the fillings in the stress variation characteristics of deformation and fracture seepage under the action of the experimental and theoretical study, based on the data from experiment analysis and comparison of the graphic, main contents and conclusions are as follows: Through the filling fracture seepage theory analysis of the stress at home and abroad and research, define the filling degree, (filling degree: filling medium volume: fissure volume), through the theoretical analysis and calculation, is deduced under the condition of confining displacement of brittle - plastic packing medium in filling degree to the stress compression and seepage characteristics. The homemade fissure filling, the lateral