消失模铸造工艺流程jMtSSBPzM.docVIP

消失模铸造工艺流程j Lost foam casting process flow jiq: 1. Make foam white mold, combined pouring system, surface brush of gasification mould, spray high temperature resistant paint and dry. 2. The special interlayer sand box is placed on the vibrating table, filling in the bottom sand (dry sand), shaking and scraping, placing the drying gasified mould on the bottom sand, filling the dry sand, and vibrating the proper time to smooth the box mouth. 3, covered with plastic film, put on the gate cup, vacuum system, vacuum, dry sand after fastening molding, pouring, white mold gasification disappeared, met