多喷头高速打印机RIP软件设计与实现-计算机技术专业论文.docxVIP

摘要I 摘要 I 摘要 随着打印和印刷行业的发展，对打印质量和打印速度的要求越来越高。 而 RIP 软件作为打印印刷系统中重要的组成部分，其图像处理的质量和效率 直接影响到打印输出的质量和速度。但是在软件方面，对图像处理的算法优 化已经不能大幅度地提高现有打印系统的效率。而加大硬件投入成为提高打 印效率最有效最直接的手段。 西安电子科技大学外部设备研究所研究设计了一款多喷头的高速打印机， 该打印机是通过固定打印喷头，避免喷头的机械移动，从而提高打印速度。 本文是依据该打印机的特性，结合现有的图像处理技术，设计并实现了一个 高效快速的多喷头高速打印机 RIP 软件，并提供了友好的人机交互界面。 在 RIP 软件的工作流程中，图像放大、图像分色和数字图像半调是三个 关键环节。本文分别分析对比了现有算法的效果和效率，结合实际项目需求， 选取高效的处理算法应用到软件中，该软件还实现了条形码的绘制和管理， 可以很方便地在打印输出图像中嵌入条形码。还集成了打印任务的管理，便 于用户保存和管理打印信息。 经过上机联调实验，表明该 RIP 软件的可行性和有效性已经满足设计要 求。 关键词： 高速打印机 RIP 固定喷头 图像放大 图像分色 数字图像半调 II ABSTRACT ABSTRACT With the development of printing and the printing industry, the high demand for print quality and speed is increasing. As an important component in the printing system, the quality and efficiency of the image processing in the RIP software directly affect the quality and speed of the print output. The optimization of the image processing algorithms has not significantly improved the efficiency of the existing printing system. The most direct and effective means to improve print efficiency is to increase the investment in hardware. Research Institute of Peripherals of Xidian University designed a high-speed multi-nozzle printer. The printer enhances the print speed by the fixed print nozzles to avoid the mechanical movement. This paper is based on the characteristics of the printer and image processing technology, and then designs a rapid and efficient RIP software for multi-nozzle high-speed printer. The software provides a friendly Human-Computer Interface. Image zoom, image separation and digital image halftone are the three key elements in RIP software workflow. This paper analyses and compares the effectiveness and efficiency of existing algorithms, then applies the efficient processing algorithms to software according to the project requirements. The software also implements the rendering and management of barcode, which can be embedded in output image easily. The RIP software also integrates the print task management, whi