差动伺服多压头压装系统研究与设计-仪器仪表工程专业论文.docxVIP

上海交通大学硕士学位论文摘要 上海交通大学硕士学位论文 摘要 万方数据 万方数据 差动伺服多压头压装系统研究与设计 摘要 压装设备作为当今工业制造领域非常重要的生产设备之一，被 广泛应用于机械、电子、汽车、航空等行业。压装检测的目的是对 目标体进行配合与过盈量的测试分析，保证压装的目标对象的配合 量能控制在一定的范围内。 本文以汽车后桥衬套压装设备为例，基于 SPL 方法设计了差 动伺服压装系统。论文的主要研究内容如下： 1）阐述了系统研究的背景和国内外现状，并对 SPL 技术进行 了介绍，指出了基于 SPL 的差动伺服压装系统的整体设计方案。 2）以汽车后桥为例对压装工件建立有限元模型，对压装过程 中传统压装和差动式压装对工件所造成的结构影响进行了仿真对 比，并对压装过程中的差动式压装设备变形进行了仿真，在此基础 上指出了差动式压装结构的优越性。 3）通过对差动伺服压装系统进行了细化的功能分析，介绍了 软硬件设计的目标和总体构架并确定了压装测控系统的硬件架构。 介绍了基于 SPL 的差动伺服压装系统的可配置式软件设计，在分 析压装系统需求的基础上，完成了压装系统的总体设计和基于 VC++的模块化设计，同时介绍了基于视觉检测的合格性检测模块。 对基于差动伺服压装系统设计的某汽车后桥压机进行了分析。 4）提出了进一步的研究方向。差动伺服压装系统还有一些需 要完善的地方，如软件结构的优化、合格性判断算法的优化等。 关键词：差动、压装、柔性、可配置、软件产品线 I 上海交通大学硕士学位论文AB 上海交通大学硕士学位论文 ABSTRACT RESEARCH AND DESIGN OF DIFFERENTIAL SERVO PRESS-MOUNTING SYSTEM WITH MULTI-HEAD ABSTRACT Press-mounting machine, as one of the most important industrial manufacturing in the field of production equipment, is widely used in machinery, electronics, Automotive, aerospace and other industries. Press-mounting aims to meet the objectives of the inspection and test analysis of interference ensure that blending amount of the target object impress-mounting can be controlled in a certain range. In this paper, differential servo press-mounting system is designed based on the SPL method which take the automobile rear axle bushing press-mounting equipment as an example. The main content of this paper is as follows: This paper expounds the background of system research and the status quo at home and abroad, and points out the differential the overall design scheme of the differential servo press-mounting system based on SPL after introduce the technology of SPL. Establish the finite element model of the pressed work piece, which takes the rear axle as an example, and simulates the contrast between the traditional pressure effect and differential pressure effect on the structure of the work piece. The deformation of the press-mounting machine during the installation process has also being simulated. And the results s