盾构刀盘的轻量化设计-机械设计及理论专业论文.docxVIP

ABSTRACT Thecu饥er head is the key component of shield machine. As the domestic shield requirement become larger and larger. It is of great meaning to master the technologies of independent design and manufacture capability of the shield machine. Through the analysis of force acting on the cu忧er head，this article makes a research 、伽 on light weight design of stand bar and cu阳r head，which meeting the strength requirement and saving materials and cost. 、 The main contents of this paper are as follows: 1.The force acting on the cutter head is analyzed first. Through the comp町ison between di旺erent work conditions of shied machine，the scurvy condition is found finally. And the succeed design of the cUtter head are based on this force. The research of Iight weight design of stand bar is made. The light weight design mathematical model of stand bar is established on the force analysis. An optimum design mathematical model is solved with the help of MATLA B.The results before and a负er Iight weight design are compared through finite element analysis. At the end，we gain the prioritization scheme ofthe light weight design ofthe stand bar. The e的ct of the choice of cUtter head type and cuttingtool，cutting-too ls collocation on the cutter head and the hatch percent on the light weight design is addressed. The research of Iight weight design of cutter head is made. Based on the analysis of the force acting on the cu饥er head，the Iight weight design mathematical model of each parts of the cutter head is established. An example of board wheel is ‘ calculated. The results before and after light weight design are compared through finite element analysis. At the end，we gain the prioritization scheme of the Iight weight design of the cutter head. KEYWO民DS: Shield，cutter-head， light weight des酬， fmite element 目录 第一章绪论…………………………..1 1.1 课题的研究背景…..…………………… ..1 1.2 国内外研究现状………………………..1 1.2.1 罔内外刀盘技术研究现状…………………………………1 1工2 优化设计研究现状…………………………………………………… 3 1.3