cs板式结构体系的l形点的试验分析及理论分析.docxVIP

优秀毕业论文 精品参考文献资料 摘要本文主要通过试验研究和理论分析对 摘要 本文主要通过试验研究和理论分析对CS板式结构体系的CS墙板间L形连接节 点的基本受力及连接性能进行了研究。本次针对L形节点的试验研究是放在整体 房屋模型试验中完成的，试验共设计了4个L形节点试件，分为两组，每组2个试 件，一组是由型钢柱连接的L形节点，另一组是由混凝土柱连接的节点。通过对 整体房屋模型施加低周往复荷载，对两种连接类型的L形节点在试验过程中的产 生的试验现象进行了观察，并对节点连接柱及拉接筋在试验过程中应变分布及变 化进行了测量，最后通过这些试验现象及测量数据对两种L形节点的工作性能进 行了分析，并对两种L形节点受力及其它多方面性能优劣进行了对比。文章最后 通过模型结构的推覆计算分析，考察了节点型钢柱对整体结构工作性能的影响。 试验研究和理论分析结果通通表明， 由型钢柱连接的L形节点，可以极大的 增加结构体系的整体延性，而且用拉接筋来连接型钢柱和墙板也很牢固可靠，所 以无论从受力还是保温隔热等构造措施方面都比混凝土连接L形节点要优越。 关键词： CS剪力板L形节点低周往复荷载型钢柱推覆分析 n ABSTRACTThe ABSTRACT The focus of this article lS the test research and theoretical analysis on the basic mechanics and seismic performance of the L—shape connection in the CS panel structure model．The experiment research on the L—shape connection was carried out in the integral building model test．Four L—shape connections were made，and two of the four L-shape connections were made of concrete and the others employed section steel．By exerting low reversed cycle loading to the overall building model，we made detail observation to the experiment phenomenon on the connection of the two type L-shape during the test，still，we carried out measurement on the distribution and changes of the node column’S stress and strain，at last,the service performance analysis WaS carried out to those L—shape connections．In the end of the article，we made a pushing calculating analysis to model structure，and inspected the influence of the node column to the overall structure’s service performance． The experiment and theoretical research shows that the L—shape connection made in section steel Can extremely strengthen the stiffness and extension of entire structural system．The connection between section steel column and wall is steady by the steel link-bar．So the connection made of section steel is better than that made of concrete in aspect of mechanics，heat preservation and insulating． KEY WORDS：CS shear panel，L--shape connection，low reversed cyclic loading，section steel column，pushing analysis Ⅲ 独创性声