鱼缸换水系统源程序原理图.docVIP

鱼缸自动换水系统原程序代码 201002031027电子10-1石宪青齐魯工业大学 2014-5-20 include REGX52.H #define uint unsigned int #define uchar unsigned char Uchar code dispcode[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d, 0x07,0x7f,0x6f,0x3f,0x71,0x73,0x79,0x37 }; /*数码管显示数值编码 */ uchar timecount,Hour,Cent,Second,qian,bai,shi,ge,THour,TCent,offTH,offTC, onTH2,onTC2,offTH2,offTC2; uchar disL,disH,keytemp,mbiao,App,onHour,onCent,offHour,offCent; uchar onHour2,onCent2,offHour2,offCent2;//4￡ 义变量 bit biaoA; //位定义 sbit ledO二P2八4; sbit ledl=P2A5; sbit led2=P2A6; sbit led3=P2A7; //sbit led4=P3八0; sbit K0=P2A0; sbitKl=P2Al; sbit K2=P2A2; sbit K3=P2A3; sbit BP=P3Al;sbit Aout=P3A4;sbit Aout2=P3A5; void displayO; void key(); uchar AddReduce(uchar dd,uchar max,char min); void Alarm_clock(); void LED_out(); //函数的初始化 void delay(uchar i) /***延时***/ { uint x; for(;i〉0;i--) for(x= 114;x0;x-); //22.1184=228” 11.0592=114 uint x; for(;i〉0;i--){BP=~BP;//采用 for 循环延时 for(x=114;x0;x--);} BP=1; void main(void) //主程序部分 { Hour=12; Cent=0;//Second=50; onHour=13; onCent=0; offHour=13; offCent=20; biaoA=l; onHour2=14; onCent2=0; offHour2=14; offCent2=15; //变量初始化 RCAP2H=0x8F; /* 定时器初始化 11.0592=8F80?22.1184=1 F00 */ RCAP2L=0x80; ET2=1; //允许T2定时器中断 TR2=1; //启动T2定时器 EA=1; whiled) //这里采用死循环实现显示阑数和按键扫描一直执行 { displayO; key(); } } /?**^2*** ? j I ***l^fy*** ^| ***^(***/ void Timer2_Server(void) interrupt 5 using 3 { TF2=0; //清除溢出标记 timecount++; if(timecount==30) timecount=0; Second++; i f(Second==60)//到一分钟 { Second=0; Cent++; if(Cent==60//到一小时 { Cent=O; Hour++; if(Hour==24) Hour=();//按天循环 } } Alarm_clock(); } switch (mbiao)// mbiao为标志位判断按键情况并进行调时操作 { case 0: {disH=Hour;disL=Cent;} break; case 1: {disH= 100;disL=Second;} break; } } /***￡氺氺氺氺* 氺*氺@氺氺*/ void displayO { if(disH== 100) //如调整小时，使小时闪烁S示 { qian=10; bai=10; shi=disL/10; ge=disL%10; } else { if(disL==100) { qian=disH/10; bai=disH%10; shi=10; ge=10; } else qian=disH/10; bai=disH%10; shi=disL/l(); ge=disL%10; } } if(mbiao3) //长按K3调整时间 if(timecount16) { if(keytemp%2) { shi=10; ge=10; } i f(k