碳钢管道焊接工艺.docVIP

Proposal on Carbon Steel Pipe Welding 碳钢管道焊接工艺 Technical description 技术特征 Pipe material and size: 20# seamless steel pipe 材质、规格： 20#无缝钢管 Work medium： water 工作介质： 水 Designed pressure：4㎏/㎝2 设计压力： 4㎏/㎝2 Work pressure：4㎏/㎝2 工作压力：4㎏/㎝2 Test pressure：6㎏/㎝2 试验压力：6㎏/㎝2 Related documents to this proposal： 本工艺编制依据： Technical specification of F06B F06B技术文件 GB50236-98《Field Equipment and Industrial Pipe Welding Work Execution and Acceptance Code》 国标GB50236-98《现场设备、工业管道焊接工程施工及验收规范》 GB50235-97《Industrial Metal Pipe Works Construction and Acceptance Code》 国标GB50235-97《工业金属管道工程施工及验收规范》 CEFOC Welding Technical Appraisal Report : HG3，HG2002-1 本公司焊接工艺评定报告：HG3，HG2002-1 Welder焊工 Welder should be certified in passing the Welding Examination of Boiler Pressure Container and Pressure Pipe。 焊工应具有“锅炉压力容器压力管道焊工考试规则”规定的焊工考试合格证。 3.2 Welder should pass the qualification test by GB50236-98 Code to obtain work permit of the Contractor before starting the welding work of this project. 焊工进入现场后，应按GB50236-98规定，先进行焊接实际操作考试合格。经总包方认可发证后，方能承担本项目的焊接工作。 3.3 This technical proposal should be complied to during the welding work of this project 焊工承担本项目的焊接工作中，应切实执行本焊接工艺。 4 Welding work inspection 焊接检验 4.1 Welding inspector should be fully acquainted with the F06B technical specification and both the international standards and this proposal 焊接检验人员应F06B技术文件及相关国标和本工艺。 4.2 Inspect the pipe materials and welding materials in accordance with the relevant rules and sign the acceptance form。 对管材焊材按规定进行检验、填表验收。 4.3 Supervise the work of welder and help him to correct any defects in work. To ensure the welding work quality, the inspector is powered to stop the work of any serious offender or those who refuse to correct defects in work。 对焊工是否执行本工艺进行全面监督检查,对违反者进行教育帮助得以改正。对严重违反者或教育不改者有权令其停止焊接工作。以确保焊接质量。 4.4 Perform the inspection of welded work in line with Article 7 of this proposal 做好本工艺第7条“焊接后检查和管理工作”。 4.5 Coordinate with the representatives of Contractor and Supervisor to