基于arm和uclinux的嵌入式系统的设计和实现-信号与信息处理专业论文.docxVIP

ABSTRACTWim ABSTRACT Wim the development of Intemet and the coming of the post·PC era,the embedded systems is becoming the focus of the 1T md璐try and presenting broad market demand． 皿e embedded systems with good support of networks and multi-tasking provide a new solution for data communications． 1mc main task of this dissertation is to implement the network transmission functions of the interface module．T扯s task comes from a project of location and command system．To increase the data transmission speed between the terminal and interface module,this dissertation uses embedded systems with inte粤ated network support to implement the data transmission．Meanwhile，in order to apply current design of embedded systems to the project development in the future,this dissertation do some improvement for filesystem and real·time，which implements a universal embedded system platform． This dissertation uses a S3C4980 development board嬲hardware platform,and USeS uClinux which is designed for processors without MMU勰Embedded operating syStem． Here is the main work of this dissertation： ●11le functional requirement of this system is analysed and the total solution of this system is proposed； ●Porting uClinux and Blob to S3C44BOX,the implement ofjffs2 mesystem； ·Implement of device drivers of 4x4 keyboard and RTLS019AS； ●皿e real-time transforming for embedded linnx based on RTLimLx．勰well弱 the test of task switching time； ●The network transmission programming．The process of pack／unpack for communications data is implemented．Proposing an appfication-layer solution for the problem ofpacket losses in transmission by UDP mode．Comparing with transmission by TCP and UDP mode，the test result indicated that the new solution c缸meet the technical guide line of location and command system． Key Words：uClinux，porting,device drivers，real·time，network transmi豁ion Ⅱ 独创性声明本人声明所呈交的学位论文是本人在导师指导下进行的研究工 独创性声明 本人声明所呈交的学位论文是本人在导师指导下进行的研究工 作及取得的研究成果。据我所知，除了文中特别加以标注和致谢的地 方外，论文中不包含其他人已经发表或撰写过的研究成果，也不包含 为获得电子科技大学