木材自动测量仪中图像传感器时序的设计.PDFVIP

第 31 卷第 6 期 南京林业大学学报(自然科学版 Vol. 31 ,No. 6 2007 年 11 月 Journal of Nanjing Forestry UniversityCNatural Sciences Edition) Nov. ,2007 木材自动测量仪中图像传感器时序的设计 吴海青，封维忠，王晓斐 (南京林业大学信息科学技术学院，江苏 南京 210037) 摘 要:提出了一种基于 CPLD( 复杂可编程逻辑器件)实现木材自动测量仪中图像传感器驱动时序电路的方 法。选用 ALTERA 公司的 CPLD 作为硬件设计平台，运用硬件描述语言对驱动时序电路进行了描述，并给 出了部分程序(矶的时序)。采用 ALTERA 公司的仿真工具 QUARTUSII 软件对所设计图像传感器的驱动 程序进行了仿真，并用数字示波器测量输出波形。测量和仿真结果表明设计方案用于木材自动测量仪中图像 传感器的驱动是可行的。 关键词:图像传感器;驱动时序电路;复杂可编程逻辑器件 ;VHDL 中图分类号:S784;TP212 文章编号:1000--2006(2007)06 一0105 一04 文献标识码:A Design of Driving Time Circuit of Linear CCD 。f the Lignum Automatic Measurement WU Hai-qing , FENG Wei-zhong ,WANG Xiao-fei (College of Information Science and Technology Nanjing Forestry University , Nanjing 210037 , China) Abstract: In the instrument of lignum automatic measurement , the length of lignum was measured by CCD. The design of the time s巳quenc巳 driving circuit of CCD was a critical prob- lem of its application. According to the complex programmable logic device , the method of designing the time sequence driving circuit was introduced. The CPLD was used as hardware design platform and VHDL was employed to d巳scribe the driving seque口cer. The designed g巳nerator had successfully fulfilled system simulation with Quartus II software and was fitted into MAX7000S. It was also observed by Oscilloscape. The simulation and the results of measurement demonstrated that this method is feasible. The time seque口ce was used to drive the CCD. This driving circuit of CCD was not only used by lignum automatic measurement but also by others CCD. Key