《洗铜棒机的设计》-毕业设计（论文）.docVIP

洛阳理工学院毕业设计（论文） PAGE 20 洗铜棒机的设计 摘 要 本设计是机械行业中较常用的洗铜棒机，主要用于清洗影响铜棒的使用性能的污垢。它具有造价低，使用方便，操作简单等特点，具有较好的实用性。其原理是靠锯末，稻壳，木屑等与铜棒在低速的滚筒中进行摩擦来实现清洗的效果。它主要由原动机，减速器，滚桶，机架，联轴器，键等联接件组成。动力系统的原理是：由高速旋转的电动机作为原动机，经联轴器减速器后需要的转速带动滚桶旋转。并根据要求对减速器，滚等的结构进行了详细的设计计算。首先：根据工作机即滚桶所需的功率选择电动机的功率；其次；根据电动机传递的功率进行减速器及滚桶的设计；最后是进行联轴器，轴承，键的选择及校核。此次设计主要用到了机械设计的知识，并查阅了《机械零件》，《等书籍机械零件手册》等书籍。 关键词：电动机 ，齿轮 ，联接件 ，轴 WASH THE COPPER ROD MACHINE ABSTRACT This design is relatively commonly used in the machinery industry is mainly used for washing machine, copper cleaning effect the performance of copper dirt. It has low cost, easy to use, simple operation characteristics and has better practicability. Its principle is to rely on the sawdust, wood, etc, with the husk of roller in low-speed tongbang of friction to realize the cleaning effect. It mainly consists of prime mover, reducer, 110mm drum, frame, couplings, key link a composition etc. The principle is: the power system of high-speed motor as a prime mover, the coupling of speed reducer to drive 110mm drum. According to the requirement of reducer, and rolling etc structure design of the detailed calculation. First: according to work namely 110mm drum machine for the power of the motor power selection, Secondly, According to the power transmission motor reducer and roll barrel and the design, Finally, bearings, is the key coupling and checking. The design of the main use the mechanical design, and the knowledge of the mechanical parts of the books, such as mechanical parts manual books. KEYWORDS: motor gear shaft coupling parts 目　录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc263333765前　言 1 HYPERLINK \l _Toc263333766第1章 传动装置的总体设计 2 HYPERLINK \l _Toc2633337671.1 拟定传动方案 2 HYPERLINK \l _Toc2633337681.2 选择电动机 2 HYPERLINK \l _Toc2633337721.2.1 电动机容量的选择 2 HYPERLINK \l _Toc2633337721.2.2电动机转速的选择 3 HYPERLINK \l _Toc2633337691.3 确定传动装置的总传动比及其分配 4 HYPERLINK \l _Toc2633337701.4 计算传动装置的运动及动力参数 4 HYPERLINK \l _Toc2633337711.5 设计计算传动零件 5 HYPERLINK \l _Toc2633337721.5.1