大型风力发电机组轮毂的强度分析及结构优化设计-机械电子工程专业论文.pdf.docxVIP

大型风力发电机组轮毂的强度分析及结构优化设计Structural 大型风力发电机组轮毂的强度分析及结构优化设计 Structural Strength Analysis and Optimization Design of Large Wind Turbine Hub Abstract Wind turbine hub iS a complicated key part that connects the blades and the shaft．and it bears the extremely complex loads condition．So it iS essential to ensure the strength and lire requirement of the hub，as well aS the light weight demand． This paper conducted the strength analysis and structure optimization design of a 2MW wind turbine hub under the suppofl of the technological innovation major special projects“A 5MW or Bigger-scale Wind Turbine Supporting Bearings”．Finite element method is adopted to complete the strength analysis and verification，and topological optimization method is applied to conduct the conceptual model of the original hub structure．New structure design of the hub whose wall thickness iS optimal iS obtained based on the dimension optimization by response surface method，and is compared with original structure by performance analysis． The main job and research description are aS follows： (1)Static strength and fatigue life analysis and verification of the original wind turbine hub structure were completed based on finite element method．Finite element model of the whole structure which considered the boundary condition equivalent modeliS built．The final static strength verification result demonstrated that the wind turbine hub structure optimization ca／]be operated under the condition that the wind turbine hub structure satisfies the strength limit request and the wind turbine hub haS the requested optimization space． (2)The concept model design scheme of wind turbine hub structure was obtmned based on the topological optimization design of Optistruct platform by using two different optimization methods．Based on the equivalent model of the boundary condition，topological optimization model is built．According to two different optimization schemes，the concept model design scheme of wind turbine hub struc